1) The Whole crust of LED street light is made of die-casting aluminum, reasonable Design of the Radiator and Lampholder Integration, good heat dissipation effect.
2) Use power LED as light source, low light decay.
3) Small size, light weight, steady and safety installation structure help to lower the wind resistance, and reduce the burden of pole. This makes the product windproof and reliable.
4) Low power consumption, simple structure, high brightness.
5) Long lifespan: above 50,000 hours.
6) Low working voltage .
7) Equiped with special optical lens, the light illumination is more higher.
8) Intelligent temperature controller and power supplier make the lifespan longer.
9) No strobe flash, no delay in start, Resistance, Shock-proof, Without Ultraviolet (UV) and Infrared (IR) Radiation 10) No filament and glass frames, avoid break of the traditional lamp, without harm to the human body,green and Environmental Protection - no lead, no mercury, no environmental pollution.
11) Quick respond time.
12) Compared with the conventional sodium and mercury lamps, LED streetlight can save 50%-80% energy.
13) Application: park, square, factory,Virescence zone,  road and so on.
Physical Specifications:
Input voltage 170V-250V
Power 112 x 1W
System Consumption 127 W
Power Factor > 0.9
Color temperature 3500k-8000k
Work temperature - 30 degree ~ +50 degree
Luminous Flux 10080 lm
IP rating IP65
Life Span > 50,000 hours
Average illumination Height 6M > 44 Lux
Height 9M > 25 Lux
Effective illuminated Area Height 6M: 10 x 24 M2
Height 9m: 12 x 30 M2
Chief Material Aluminum Alloy
Net Weight 8.5 KG
Size 306 x 660 x 65 (mm)
Packging size 680 x 315 x 90 (mm)
Installing size Ф61 (mm)